Photoluminescent Glow in the Dark Hazard Anti Slip Tape SS#600

Stock:in stockIn stock Colour: Glow in the Dark

SS#600 Photoluminescent Glow In The Dark Anti Slip Tape:

The surface of our Photoluminescent Glow In The Dark anti slip tape is charged by normal illumination e.g. daylight or fluorescent light and omit a glow as soon as the natural light source is interrupted i.e. power failure, smoke obstruction or similar, providing excellent stair safety in emergency situations.

Ideal for use in areas with no, or very little light. Avoid tripping over your front step at night or reduce the risk of your clients having a slip and fall accident as they leave your bar or night club.

Perfect for fitting in badly lit stairways and hallways.

Stop Slip glow in the dark anti slip tape can be charged by natural or artificial lighting and provide a steady stream of light discharge.

Read More...
RRP: £36.89 You Save: £10.54 £26.35 ex vat £31.62 inc vat
  • Installation

    Anti-Slip Self Adhesive Tape Application Instructions

    For best results follow the instructions below to ensure maximum performance in all environments.

    1. Material Storage

      Ensure the material is kept in dry, warm conditions in the original protective packaging.
    2. Surface Preparation

      A clean, dry and smooth surface is essential. If you are applying to a Chequer Plate or other profiled or uneven surface, please use our SS#400 Conformable anti slip tape. Use an IPA (Isopropyl Alcohol) cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits / petrol / lighter fluid etc as these leave behind a thin, greasy residue. Ensure prepared surface is above 10°C. Apply a small amount of the IPA Cleaner to the surface using single sweeps. Do not re-wipe over the area that has been cleaned with the dirty cloth.
    3. Porous Surface Sealing

      Porous surfaces must be sealed prior to application to prevent water attacking the adhesive. We supply a specific Primer for this job which can be added to your shopping cart during checkout. Apply a thin coat to the thoroughly cleaned surface using a paint brush, then leave to dry. In normal conditions, drying should take less than 30 minutes.
    4. Tape Application

      Cut tape to the required dimensions. Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Try to ensure that the tape is not taut. Our Conformable Anti Slip Tape is designed for Chequer Plate and other profiled or uneven surfaces and can be gently firmed into position using a rubber mallet to help the tape fit into the contours of the surface.
    5. Finish!

      Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this). We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product. Only apply a very small bead down the edges after the tape has been applied. If correctly applied, the new anti-slip surface can be walked on straight away, though you will get maximum benefit from the adhesive system after 48 hours.
  • Videos
  • Delivery

    We dispatch to anywhere in the UK Mainland Starting From £3.95. The cost of delivery will be shown once you have added products to your basket. Next Day Deliveries Are Normally Available For Our Stock Anti Slip Tape Products If Processed By 2PM!

  • Downloads
  • Reviews

    Reviews

    There are no reviews yet. Why not be the first?

  • Q&A

    Questions and Answers

    Ask a Question

    To ask a question about the Photoluminescent Glow in the Dark Hazard Anti Slip Tape SS#600, please fill in the form below.