Self Adhesive SS#325 Soft Touch+ Clear Anti Slip Stair Tread 150mm X 610mm

Stock:in stockIn stock Finish: Clear

Benefits Of Our SS#300 Anti Slip Treads

  • 150mm X 610mm Pre Cut Stair Tread
  • Non Abrasive So Ideal For Barefoot or Food Areas
  • Immediately reduces the risk of slip accidents
  • Self-Adhesive Making It Easy & Quick To Apply
  • Can be used indoors and outdoors
  • Used for standard applications inc stairs etc
  • Cost Effective Anti-Slip Solution
  • Easily Cut To Size With Either Scissors Or A Knife
  • Excellent Quality Being Manufactured In The UK
  • Quality Guaranteed
  • Helps You Meet DDA Regulations & Duty Of Care
  • Durable Anti Slip Product
Read More...
RRP: £9.00 You Save: £1.80 £7.20 ex vat £8.64 inc vat
  • Installation

    Anti-Slip Self Adhesive Tape Application Instructions

    For best results follow the instructions below to ensure maximum performance in all environments.

    1. Material Storage

      Ensure the material is kept in dry, warm conditions in the original protective packaging.
    2. Surface Preparation

      A clean, dry and smooth surface is essential. If you are applying to a Chequer Plate or other profiled or uneven surface, please use our SS#400 Conformable anti slip tape. Use an IPA (Isopropyl Alcohol) cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits / petrol / lighter fluid etc as these leave behind a thin, greasy residue. Ensure prepared surface is above 10°C. Apply a small amount of the IPA Cleaner to the surface using single sweeps. Do not re-wipe over the area that has been cleaned with the dirty cloth.
    3. Porous Surface Sealing

      Porous surfaces must be sealed prior to application to prevent water attacking the adhesive. We supply a specific Primer for this job which can be added to your shopping cart during checkout. Apply a thin coat to the thoroughly cleaned surface using a paint brush, then leave to dry. In normal conditions, drying should take less than 30 minutes.
    4. Tape Application

      Cut tape to the required dimensions. Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Try to ensure that the tape is not taut. Our Conformable Anti Slip Tape is designed for Chequer Plate and other profiled or uneven surfaces and can be gently firmed into position using a rubber mallet to help the tape fit into the contours of the surface.
    5. Finish!

      Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this). We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product. Only apply a very small bead down the edges after the tape has been applied. If correctly applied, the new anti-slip surface can be walked on straight away, though you will get maximum benefit from the adhesive system after 48 hours.
  • Videos
  • Delivery

    We dispatch to anywhere in the UK Mainland Starting From £3.95. The cost of delivery will be shown once you have added products to your basket. Next Day Deliveries Are Normally Available For Our Stock Anti Slip Tape Products If Processed By 2PM!

  • Downloads
  • Reviews

    Reviews

    by Domenico Marcantoni, 17 Feb 20175 stars

    Very happy will recommend your product eny time, thanks

  • Q&A

    Questions and Answers

    Ask a Question

    To ask a question about the Self Adhesive SS#325 Soft Touch+ Clear Anti Slip Stair Tread 150mm X 610mm, please fill in the form below.